server 1 ping

Post in here if you're having problems with any hardware\software (not just PC related) or you want some advice on either.

Moderator: Administrator

User avatar
IXL
[OFc] Clan Council
[OFc] Clan Council
Posts: 1222
Joined: Wed Aug 15, 2007 12:00 am
Location: WEDS : GRID, THURS : D.O.D : SOURCE, FRI : C/STRIKE SOURCE, SAT/SUN : BATTLEFIELD 2
Contact:

Re: server 1 ping

Whatever the circumstances, you should see your router ip first... ( IE LAN - as per my previous posts pictures) :?

I dont know what else to suggest, Can you please turn off any firewalls you may have on...

Did you say you have a laptop? Can you install HLSW on that as well and try the same thing?

Sounds like its your router or some setting on it tbh... But its hard to say without seeing it, perhaps you have a port range block or some other setting on your router. I just dont understand why the hops are hidden. Do you have a usb DSL modem you can try direct?

Have you a mate nearby you can just plug your laptop or even PC in on their broadband and test it that way...?
User avatar
snoopy
[OFc] Member
[OFc] Member
Posts: 146
Joined: Thu Feb 05, 2009 12:00 am
Location: Truro, Cornwall

Re: server 1 ping

i'll see what i can sort out. i have been on a couple of maps on server 1 and my ping has been fine.

what does the msg that i get on console, which i posted earlier relate too.

i dont get it on the maps i can go on, so it might be the problem
Be a team player, or be a shield


Image
User avatar
snoopy
[OFc] Member
[OFc] Member
Posts: 146
Joined: Thu Feb 05, 2009 12:00 am
Location: Truro, Cornwall

Re: server 1 ping

just managed to get on server one, for a few rounds on train, but then went to tides and got the same problem. i seem to be having it on certain maps, and those maps have this:

Warning: using WorldTwoTextureBlend on a non-displacement surface.
Support for this will go away soon.
- Material : dev/dev_blendmeasure
- Surface center : -1239 -760 -32
Warning: using WorldTwoTextureBlend on a non-displacement surface (material: dev/dev_blendmeasure). Support for this will go away soon.
Warning: using WorldTwoTextureBlend on a non-displacement surface.
Support for this will go away soon.
- Material : dev/dev_blendmeasure2
- Surface center : -312 -1360 -104


can anyone shed any light on this message please, coz i think it has something to do with it.
Be a team player, or be a shield


Image
User avatar
IXL
[OFc] Clan Council
[OFc] Clan Council
Posts: 1222
Joined: Wed Aug 15, 2007 12:00 am
Location: WEDS : GRID, THURS : D.O.D : SOURCE, FRI : C/STRIKE SOURCE, SAT/SUN : BATTLEFIELD 2
Contact:

Re: server 1 ping

People get these all the time, even me... they do tend to clear up.

Im still none the wiser what the cause is to your issue, even after the PM's.

Ive even made a temporary change to the server to see if that resolves some issues, which is has but that has had no effect on your problem.

Im not saying were done and dusted.. ( sorry no pun intended ) but atm, its illuding me.

Do you have any other steam games...? Do you have any issues with those?
User avatar
snoopy
[OFc] Member
[OFc] Member
Posts: 146
Joined: Thu Feb 05, 2009 12:00 am
Location: Truro, Cornwall

Re: server 1 ping

i use tf2 and l4d, but they bth run fine. at first i thought it might be a problem with vista and the engine, but now i can get onto some servers and play css, like on server 2, but my ping is unusally high on server 1
Be a team player, or be a shield


Image
User avatar
smithster
Regular
Regular
Posts: 297
Joined: Mon Aug 13, 2007 12:00 am
Location: London

Re: server 1 ping

cut ya losses, save all ya docs and format ya PC, start from scratch. will be done in a couple hours, quicker than going bacwards and forwards like this.

save ya maps etc but id let everything download form the server like new and just build up ya map and sound etc collection again from scratch
Image
User avatar
snoopy
[OFc] Member
[OFc] Member
Posts: 146
Joined: Thu Feb 05, 2009 12:00 am
Location: Truro, Cornwall

Re: server 1 ping

i was going to format my pc, but when i bought it it already had vista on it, and i didn't have any windows disks come with it. i had to make my own recovery disks, which i have(14 of them), and tried putting them in the drive and restarting, but it just restarted as normal. i read somewhere i need to disable cmor(or something) so the disk will run when the pc is turned on, but dont know where it is
Be a team player, or be a shield


Image
Stueh
Regular
Regular
Posts: 115
Joined: Tue Aug 14, 2007 12:00 am

Re: server 1 ping

press F8 at start up and select your cd drive :) i think thats what you mean :D
User avatar
smithster
Regular
Regular
Posts: 297
Joined: Mon Aug 13, 2007 12:00 am
Location: London

Re: server 1 ping

you can make a recovery dvd cant you? why the hell have u got 14 discs!! u used cd's didnt u!

make a recovery DVD
restart ya pc
sometimes u will see an option to "select boot device press f9" or something liek that, if not do what jolteh said, if that doesnt work then we need to set your first boot device to your dvd drive in bios. we'll do that if u come to it.

what pc do u have, sometimes it comes with a recovery program installed? like HP. do you have a partition on your hgard drive called "recovery" or something?that would make life lot easier
Image
User avatar
IXL
[OFc] Clan Council
[OFc] Clan Council
Posts: 1222
Joined: Wed Aug 15, 2007 12:00 am
Location: WEDS : GRID, THURS : D.O.D : SOURCE, FRI : C/STRIKE SOURCE, SAT/SUN : BATTLEFIELD 2
Contact:

Re: server 1 ping

Erm.. Just bear in mind he might not actually have a dvd drive...

Also, you can usually only create restore disks "ONCE". After which, you wont be able to re-create cd's/dvd's. ( thats with DELL/HP/Compaq and Advents anyway). You will be promted this fact when you try to do it again. Even if you do a restore and try to create disks again, it STILL tells you that its been done once and wont allow you to do it again.

Usually, you dont even need the CD's or DVD's to restore, you can do a partition restore, which is executed from a program by your manufacturer in the Start Programs option or from hitting a key listed in the post-BIOS screen. Select a "destructive" restore - Just make sure you backup any files you want to keep. A NON Destructive restore will restore your system to factory, but keep your documents intact - but I wouldnt trust it.

All this aside tho, doesnt explain to me why he cannot see his router ip in hlsw.

I still say, if its possible, to take the pc to someone elses house to test the connection there... or try another router.
User avatar
snoopy
[OFc] Member
[OFc] Member
Posts: 146
Joined: Thu Feb 05, 2009 12:00 am
Location: Truro, Cornwall

Re: server 1 ping

i have a compaq presario, and i only had cd's when i made the recovery. i wanted to do it any ixl, so i though i'll try it and if it work it works, and if not, i can try other things.

i should be reformatting on weekend, so ill probably be on laptop for a few days while i regain all my files and programs etc.
Be a team player, or be a shield


Image
User avatar
snoopy
[OFc] Member
[OFc] Member
Posts: 146
Joined: Thu Feb 05, 2009 12:00 am
Location: Truro, Cornwall

Re: server 1 ping

reformatted now. going to try server 1.

IXL, i did a tracert at my mums house on her computer and she times out as well( we both use the orange livebox) so i think it is to do with the livebox itself that we cant trace hops.
Be a team player, or be a shield


Image
User avatar
snoopy
[OFc] Member
[OFc] Member
Posts: 146
Joined: Thu Feb 05, 2009 12:00 am
Location: Truro, Cornwall

Re: server 1 ping

Warning: using WorldTwoTextureBlend on a non-displacement surface.
Support for this will go away soon.
- Material : dev/dev_blendmeasure
- Surface center : -1239 -760 -32
Warning: using WorldTwoTextureBlend on a non-displacement surface (material: dev/dev_blendmeasure). Support for this will go away soon.
Warning: using WorldTwoTextureBlend on a non-displacement surface.
Support for this will go away soon.
- Material : dev/dev_blendmeasure2
- Surface center : -312 -1360 -104




anyone know what this means and how it can be rectified?

it only appears on maps i cannot play becuase of huge ping like dust etc
Be a team player, or be a shield


Image
User avatar
MudShark
[OFc] Clan Council
[OFc] Clan Council
Posts: 1401
Joined: Mon Aug 13, 2007 12:00 am
Location: Aberdeenshire
Contact:

Re: server 1 ping

I don't think this has anything to do with your problems. This is highlighting errors in the map. Most maps have an error or two in them. All its doing is not placing an object on thr map for some reason.
---------------------------------------
Life is a Terminal Disease

Muddy
User avatar
Legato
[OFc] Member / Map Specialist
[OFc] Member / Map Specialist
Posts: 388
Joined: Mon Aug 13, 2007 12:00 am
Location: Connecticut, USA

Re: server 1 ping

iirc my mate mat has this exact same problem with some of the maps, and we spent the better part of a year trying to sort it out lol, eventually giving up.. he can play on S2 but not S1
Image
Post Reply